Steam Tables

Interactive steam tables based on the IAPWS-IF97 formulation, the basis of the ASME steam tables. Choose whether you know the pressure or the temperature, then the steam condition: the tool gives the saturation temperature or pressure, enthalpy, entropy, density and specific volume, and plots the point on the temperature–entropy diagram.

Step 1

What do you know?

You know
Steam condition
Step 2

Your data

Atmospheric pressure:
Results

Properties

Temperature–entropy diagram

Saturation curveIsobar at the entered pressure

Worked example

At 150 psig, dry saturated steam is at 365.9 °F. Its enthalpy is 1,196.0 BTU/lb, including 857.4 BTU/lb of latent heat, and its specific volume is 2.757 ft³/lb. At 95% quality, the mixture enthalpy drops to 1,153.1 BTU/lb.

Assumptions: IAPWS-IF97 industrial formulation (regions 1, 2 and 4), validated against the official IAPWS check values; enthalpy and entropy are zero for liquid water at the triple point; atmospheric pressure of 14.696 psia, adjustable for the site.

Frequently asked questions

Why enter the pressure in psig?

Pressure gauges read gauge pressure, while steam tables use absolute pressure. The tool adds atmospheric pressure: 14.696 psia at sea level, or your site value if you change it.

What is steam quality?

It is the mass fraction of steam in a saturated water-steam mixture. At 95%, each pound of mixture holds 0.95 lb of steam and 0.05 lb of entrained water. Dry saturated steam has a quality of 100%.

What is the difference between saturated and superheated steam?

Saturated steam is at the boiling temperature of water at its pressure. Superheated steam is hotter than that temperature at the same pressure; the difference is the superheat.

What range do these tables cover?

Saturation is covered up to about 2,380 psig (662 °F), and superheated steam or compressed water up to 1,472 °F (800 °C) and 100 MPa. The zone near the critical point is not covered.

Related calculators

Written and reviewed by Alex Lapierre, P.Eng. (ing.), MBA, 30+ years in industrial thermal energy. Updated November 17, 2026.

Scroll to Top